arimeo classic S für uPVC windows

arimeo classic S - components of hardware-independent window rebate ventarimeo classic S is a self-adjusting window rebate vent for uPVC windows. It can be used in rebate and centre gasket systems to ensure an air change when the windows are closed. arimeo classic S is positioned in the sash instead of the sash overlap gasket and, set in the respective colour of the window gasket, is almost invisible.

Areas of application of arimeo classic S:
  • cross ventilation
  • as a pure fresh air supply device in combination with exhaust air fans
  • as a combustion air supply device for room air-dependent gas hot water heaters or wood-burning stoves

How it works

The air change is driven passively due to pressure differences between the inside and outside. In case of cross ventilation, pressure differences arise due to wind and thermal; in case of fan-assisted ventilation due to exhaust air systems. The ventilation duct is realized through the window rebate exclusively, i.e. the space between the sash and the fixed frame. To achieve this, the outer frame gasket is replaced by exchange gaskets at defined positions, so that the air can flow in the window rebate and then further to the inside of the room by passing arimeo, which is positioned in the upper area of the window instead of the inner sash overlap gasket. The air flow described can arise bidirectionally, depending on the pressure difference.

 

arimeo classic S control flaps adjust the air flow preciselyarimeo – installed at the sash – is the regulating element in the air change described. Thanks to the innovative hinge technology of the control flaps, a sensitive air flow control is realized responding to the slightest movement of air. These control flaps restrict the air flow in case of high wind forces and thus, prevent draughts.

 

Installation

arimeo classic S - installation of the self-adjusting window rebate ventarimeo classic S can be locked into the window instead of the sash overlap gasket regardless of any window hardware and always at the ideal position. Thus, many of the time-consuming steps become redundant on the glazing section. which means tremendous time and cost saving at the window factory.  Lock into instead of the gasket. Ready.

For air flow, the outer fixed frame gasket is replaced by exchange gaskets at defined positions. The selection of the number of vents required and appropriate installation variants is primarily dependent on the volume of air required. The different installation variants are shown below.

Installation instruction arimeo CS

Performance data arimeo CS in uPVC windows with rebate gasket system

arimeo classic S is an ift-tested product. The performance data can be reviewed in the following overviews…

overview ventilation characteristics rebate gasket system overview sound insulation rebate gasket system

…respectively in the following test evidences of performance data, which, in addition, are accessible on the ift-tested-website of ift Rosenheim. Log-in data with respective ID is stated in the ift-icon below.

 

The following are the tested installation variants of arimeo classic S in uPVC windows with rebate gasket system.

single acoustic

arimeo classic S installation variant single acoustic
arimeo classic S performance data single acoustic

single

arimeo classic S installation variant single
arimeo classic S performance data single

double acoustic

arimeo classic S installation variant double acoustic
arimeo classic S performance data double acoustic

double

arimeo classic S installation variant double
arimeo classic S performance data double

triple acoustic

arimeo classic S installation variant triple acoustic
arimeo classic S performance data triple acoustic

triple

arimeo classic S installation variant triple
arimeo classic S performance data triple

Performance data arimeo CS in uPVC windows with centre gasket system

arimeo classic S is an ift-tested product. The performance data can be reviewed in the following overviews…

overview ventilation characteristics centre gasket system overview sound insulation centre gasket system

…respectively in the following test evidences of performance data, which, in addition, are accessible on the ift-tested-website of ift Rosenheim. Log-in data with respective ID is stated in the ift-icon below.

 

The following are the tested installation variants of arimeo classic S in uPVC windows with centre gasket system.

single acoustic

arimeo classic S installation variant single acoustic centre gasket system
arimeo classic S performance data single acoustic centre gasket system

single

arimeo classic S installation variant single centre gasket system
arimeo classic S performance data single MD

double acoustic

arimeo classic S installation variant double acoustic centre gasket system
arimeo classic S performance data double acoustic centre gasket system

double

arimeo classic S installation variant double centre gasket system
arimeo classic S performance data double centre gasket system

triple acoustic

arimeo classic S installation variant triple acoustic centre gasket system
arimeo classic S performance data triple acoustic centre gasket system

 triple

arimeo classic S installation variant triple centre gasket system
arimeo classic S performance data triple centre gasket system

Compatible window systems

arimeo classic S can be installed in current window systems. If the window system is known, the correct type of vent can be identified with the help of the following list.

list of compatible window systems

arimeo classic S can also be retrofitted in existing windows. As the window system is not generally known in these cases, the correct vent type is identified by measuring the gasket groove of the sash.

identifying the type of arimeo CS

 

Text for tender

arimeo classic S for uPVC windows

 

Download as .doc

Decentral window rebate vent for uPVC windows with exclusively automatic flow rate control through control flaps and installation in the upper sash regardless of window hardware. Concealed installation in the window rebate, without milling. Installation by locking into the groove of the sash overlap gasket. Vent is invisible when the window is closed. There are no elements that need to be operated and no visible vent elements attached additionally.

Exchange gaskets (included in delivery) allow the air to enter respectively exit in the area of the external frame gasket.

The following certificates issued by notified testing bodies must be presented:

  • air permeability including air flow rate characteristic curve according to DIN EN 13141-1
  • watertightness according to DIN EN 12208 in association with DIN EN 1027
  • sound reduction value Rw according to EN ISO 10140-2, assessed according to EN ISO 717-1

product to offer: arimeo classic S

gasket colour of the window: __________________________

quantity:____________________

unit:____________________

unit price:_______________________

total price:_______________________